THE ORIGINAL PROTO PIPE DELUXE, Proto pipe pokers and parts

Buy	The Original Proto Pipe Parts and Accessories MSRP $49.99	$ Price
	1 - The Original Proto Pipe™ Deluxe	29.99
out	3 - Original Proto Pipe™ Deluxe $23.33 ea	$69.97
out	Ten (#10) - Original Proto Pipes™ Deluxe Less than $16.00 each	159.99
	Proto Pipe Tar Trap Removal Tool / Pipe Stand - MAHOGANY Collectors Edition FREE POLY DIPPED	5.99
	Proto Pipe Tar Trap Removal Tool / Pipe Stand - Poly Dipped and stained Pine	4.99
	D - Proto Pipe Poker MSRP $11.99	5.99
	# THREE (#3)- Proto Pipe Pokers Less than $4 ea.	11.99
	# TEN (#10) - Proto Pipe Pokers Less than $3 ea.	29.90
	A - Proto Lid with Allen Screw and Washer	5.95
	B- 1 Proto Mouthpiece 1.99 \| <- 3 - Proto Mouthpieces 3.99	3.99
	C - 1 - Tar Trap, 8.99 (may not fit all pipes)	8.99
	E - Proto POD	8.99
	F bare pipe to replace broken stems	8.99
	F+C BARE PIPE WITH TRAP TRAP and FREE MOUTH PIECE	13.99
	Proto Pipe Gift Set BUY 1 Proto Pipe Deluxe, 1 Poker, AND 1 Tar Trap Tool, AND SAVE $3.00	$38.97

Tar Traps are no longer Available, every Trap is custom fit to its pipe

Wholesale prices to everyone, ALWAYS IN STOCK!

Sell them to your Friends, at flea markets, etc, and make some $ :)-~

Grinders <----

Tar Trap Removal Tool. MAHOGANY. Invented, Royally Tested, and Made by Yours Truly.

Make sure you remove the "poker", that holds the tar trap in.
On a solid surface, Place your Proto Pipe on the wooden pipe holder so that the trap is centered over the 9/16" hole.
Place the poker into the center hole of the bowl.
Using hammer or similar item, tap the Poker until it is out.
Print Proto Pipe Cleaning Instructions and clean your pipe. Turn Pipe upside down with lid closed and screw in small hole. Start the trap by hand with the 2 dots aligned. Use the wooden part of the hammer, or similar item to replace the tar trap to prevent denting it.
I suggest using a small amount of Vaseline (or if its leaking see below) to lubricate the trap before re-install for future removal and cleaning.

Uses A Standard Poker. If the trap is way tight, plan on using a poker or 2 only for tar trap removal, as the end will mushroom out. Start in center hole, then move poker to all the other holes if necessary.

If your Tar Trap is wearing out, and Tar is leaking out the bottom, This product can be bought at any Auto Parts Store. Put masking tape on the top and bottom,. then spray sides of Tar Trap with the copper coat and re-assemble.

"The Original Proto Pipe™ Deluxe"

These are the Real Deal. Made in the USA!!

Proto Pipe Cleaning Instructions